News Center
ABS DH32 Steel Plate for Ship
ABS DH32 shipbuilding Steel offered by Bebon Industry is certificated by ABS. The shipbuilding steel plate ABS DH32 own high tensile strength and good toughness properties. ABS DH32 is usually widely use for shipbuilding & platform.
ABS DH32 Shipbuilding steel plate specification:
Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.
Steel Standard: ABS (American Bureau of Shipping)
Rolling Type: Shipbuilding steel plate, High tension ship plate
Heat Treatment: TMCP/Normalized
ABS DH32 Steel Chemical Composition:
C < 0.18
Si < 0.50
Mn < 0.90-1.60
P < 0.035
S < 0.035
Cu < 0.35
Al < 0.015
Cr <0.20
Ni <0.40
Mo <0.08
Cb 0.02-0.05
V 0.05-0.10
Note: Grain refining requirements apply to still this steel grade.
Values are % by mass �C maximum value unless otherwise stated
ABS DH32 Steel Mechanical Composition:
Yield Strength: >335 MPa
Tensile Strength: 490-620 MPa
Elongation: > 22 %
Delivery Detail: According to clients' request.
Payment form: T/T, L/C
Trading term: FOB, CIF, CFR
BEBON steel plates and sheets have been exported to worldwide shipyard and ship building company, we have mill ABS DH32 for shipbuilding. If you have any needs in ABS DH32 steel plate, please feel free to contact us.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
