News Center
AH46 shipbuilding steel plate has good toughness properties and higher strength. It is widely used in offshore oil drilling platform, the hull of ship building and ship repairing, the platform pipe joints and other components. More information about AH46 shipbuilding steel details, please see the following:
AH46 shipbuilding steel specification:
Length: 6000mm-12500mm, Thickness: 4mm-80mm, Width: 1500mm-4500mm
AH46 chemical composition:
|
Grade |
C max |
Si |
Mn max |
P max |
S max |
Als |
N max |
Nb max |
V max |
Ti max |
B max |
|
AH46 |
0.21 |
0.10-0.55 |
1.7 |
0.035 |
0.035 |
0.015-0.08 |
0.20 |
0.04-0.10 |
0.04-0.10 |
0.02 |
0.005 |
|
Grade |
Mechanical Property |
Charpy V Impact Test |
||||
|
Yield Min Mpa |
Tensile Mpa |
Elongation Min % |
Degree |
Energy 1 (J) |
Energy 2(J) |
|
|
AH46 |
420 |
530-680 |
18% |
0 |
28 |
42 |
AH46 shipbuilding steel plate additional condition :
UT (Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered), Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
As a professional global AH46 shipbuilding steel supplier, we promise we can offer you the qualified AH46 shipbuilding steel and our AH46 shipbuilding steel price is reasonable. If you have any confusion in AH46 shipbuilding steel price or AH46 shipbuilding technical conditions, please contact us freely.
Contact:
Tell: 0086-371-86151827, 0086-371-86011881
E-mail:[email protected]
Skype: bebon.abby
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
