ASTM A131 DH36 Steel Sheets for Ships

Posted:5/18/2017 10:11:30 PM

Grade DH36 under ASTM A131 standard is available in plates, sheets, profiles and bars intended primarily for ships construction field.

ASTM A131 DH36 Steel Sheets for Ships
ASTM A131 structural steel for ships overs two categories: ordinary strength-Grades A, B, D, and E with a specified minimum yield point of 34 ksi, and higher strength- Grades AH, DH, EH and FH with a specified minimum yield point of 46 ksi, 51ksi or 57ksi.
A131 DH36 higher strength shipbuilding steel are avaialble with 100mm for plates and 50mm for profiles and bars.
A131 DH36 Steel Sheets Chemical Composition:
C: 0.18 max; Si: 0.10-0.50; Mn (Min): 0.90-1.60; P: 0.035max.; S: 0.035 max.; Cr: 0.20max.; Mo: 0.08max.; Ni: 0.40max.; Cu: 0.35max.; Cb: 0.02-0.05; V: 0.05-0.10.
A131 DH36 shipbuilding steel sheets shall be normalized, control rolled, thermo-mechanical control processed, or quenched and tempered condition when as specified.
If you’re looking for A131 DH36 shipbuilding steel sheets or other offshore steel material, welcome to contact us. BEBON STEEL is able to supply various structural steel material for ships.

Hot ProductsSee More+

  • Shipbuilding steel pipe

    Shipbuilding steel pipe

    GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.

  • Shipbuilding use angle steel

    Shipbuilding use angle steel

    Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.

  • Shipbuilding flat bar

    Shipbuilding flat bar

    Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.

  • Bulb flat steel for shipbuilding

    Bulb flat steel for shipbuilding

    The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.

  • FH40 Shipbuilding steel plate

    FH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.

  • EH40 Shipbuilding steel plate

    EH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.

You can contact us through the following ways:

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

  • Address:XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA
  • Hotline:0086-371-86151827
  • Fax:    0086-371-86011881
  • E-mail:[email protected]