CCS Grade DH36 Carbon Steel Equivalents

Posted:3/2/2017 10:52:40 PM

CCS Grade DH36 carbon steel equivalents are high strength structural steel for offshore, shipbuilding steel and marine engineering. Grade DH36 shipbuilding steel plates have yield strength of 51,000 psi (355 MPa), and ultimate tensile strength of 71,000 - 90,000 psi (490-620 MPa).
CCS Grade DH36 Carbon Steel Equivalents:
ABS - American Bureau of Shipping, USA (ABS DH36 ; AB DH36)
LR/LRS - Lloyd's Register of Shipping, Great Britain (LR DH36 ; LRS DH36)
GL - Germanischer Lloyd , Germany (GL-D36)
DNV - Det Norske Veritas, Norway (NV D36)
BV - Bureau Veritas, France (BV DH36)
RINA - Registro Italiano Navale, Italy (RINA DH36)
CCS Grade DH36 Carbon Steel Plates Available Size:
Thickness: 3mm to 150mm
Width: 1000mm to 4020mm
Length: 3000mm to 12000mm
CCS Grade DH36 Sheets Chemistry(% by mass)

Grade

C

Si

Mn (Min)

P

S

Cr

Mo

Ni

Cu

Cb

V

DH36

0.18

0.10/0.50

0.90/1.60

0.035

0.035

0.20

0.08

0.40

0.35

0.02/0.05

0.05/0.10

DH36 0.18 0.10/0.50 0.90/1.60 0.035 0.035 0.20 0.08 0.40 0.35 0.02/0.05 0.05/0.10
CCS Grade DH36 carbon steel plates are structural steel for ships constructions. CCS Grade DH36 shipbuilding steel plates are used for the main structural build including the hull and superstructure. This shipbuilding steel is suitable for new builds or refits and can be found in large bulk carriers, container ships and passenger liners. 

Hot ProductsSee More+

  • Shipbuilding steel pipe

    Shipbuilding steel pipe

    GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.

  • Shipbuilding use angle steel

    Shipbuilding use angle steel

    Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.

  • Shipbuilding flat bar

    Shipbuilding flat bar

    Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.

  • Bulb flat steel for shipbuilding

    Bulb flat steel for shipbuilding

    The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.

  • FH40 Shipbuilding steel plate

    FH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.

  • EH40 Shipbuilding steel plate

    EH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.

You can contact us through the following ways:

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

  • Address:XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA
  • Hotline:0086-371-86151827
  • Fax:    0086-371-86011881
  • E-mail:[email protected]