News Center
ah36 shipbuilding steel is a kind of high tensile strength marine steel. ah36 shipbuilding steel owned 355 Mpa yield strength and minimum 490 Mpa tensile strength. More informational about AH36 shipbuilding steel, please see the following:
AH36 shipbuilding steel specification:
Thickness: 8mm to 100mm
Width:1800mm to 4000mm.
Length: 6000mm to 18000mm.
Supply Ability: 10000 Tons per month
AH36 shipbuilding steel surface treatment: Hot rolled and Coated or shot blasting and painting
Additional service: Shot blasting and painting, Cutting and welding as per user’s request.
AH36 shipbuilding steel test: Ultrasonic examination, Normalized, Quenched and Tempered, Z-test(Z15,Z25,Z35) and Third party inspections by end user.
AH36 shipbuilding steel chemical composition:
|
Grade |
C |
Si |
Mn (min) |
P |
S |
Cr |
Mo |
Ni |
Cu |
Cb |
V |
|
ah36 |
0.18 |
0.10/0.50 |
0.90/1.60 |
0.035 |
0.035 |
0.20 |
0.08 |
0.40 |
0.35 |
0.02/0.05 |
0.05/0.10 |
ah36 shipbuilding steel mechanical properties:
|
Grade |
Thickness(mm) |
Min Yield (Mpa) |
Tensile(MPa) |
Elongation(%) |
Min Impact Energy |
|
|
ah36 |
8mm-50mm |
Min 355Mpa |
490-620Mpa |
21% |
0 |
34J |
|
51mm-70mm |
Min 355Mpa |
490-620Mpa |
21% |
0 |
41J |
|
|
71mm-100mm |
Min 355Mpa |
490-620Mpa |
21% |
0 |
50J |
|
|
The min impact energy is longitudinal energy |
||||||
ah36 shipbuilding steel application:
ah36 shipbuilding steel is mainly used for making the offshore oil drilling platform, the hull of ship building and ship repairing, the platform pipe joints and other components. ABS AH36 Shipbuilding steel plates also can be used for producing container and bulk cargo vessels as well as cruise ships, ferries and yachts.
As a professional ah36 shipbuilding steel supplier, we promise we can offer you the qualified steel. Besides that, we could promise the delivery time and the competitive price. Any need inah36 shipbuilding steel price or ah36 shipbuilding steel technical conditions, please contact us freely.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
