News Center
The higher steel grade A131 Grade FH40 shipbuilding steel plate are used abnormally owning to its high cost and substitutability.With the minimum yield point at 390 Mpa,and tensile strength within 510-650 Mpa,steel plate A131 Grade FH40 can bear the higher strength and used to some steel structure parts in ships.
ASTM A131 FH40 Steel Plate Specification:
Thickness 4mm -260mm
Width :1200mm-4000mm
Length :3000mm-18000mm
ASTM A131 FH40 high strength marine grade steel plates chemical composition:
| Grade |
C % |
Si % |
Mn % |
P % |
S % |
Al(acid soluble),min% |
Cb |
V |
Ti |
Cu |
Cr |
Ni |
Mo |
N |
|
A131 FH40 |
0.16 |
0.10-0.50 |
0.90-1.60 |
0.025 |
0.025 |
0.015 |
0.02-0.05 |
0.05-0.10 |
0.02 |
0.35 |
0.20 |
0.40 |
0.08 |
0.009 |
ASTM A131 FH40 high strength marine grade steel plates mechanical property:
| Grade |
Yield Strength (Mpa) |
Tensile Strength |
Elongation in8 in.[200mm] |
Elongation in8 in.[200mm] |
Impact Energy |
Test Temperature(°C) |
|
A131 FH40 |
≥390 |
510-650 |
≥19 |
≥22 |
37 |
-60 |
If you have any enquiry about A131 Grade FH40 shipbuilding steel plate or looking for a sincerely A131 Grade FH40 shipbuilding steel plate supplier and want to get the price,pls contact with us freely.We will support you the highest quality steel,most reasonable price and shortest delivery time.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
