Shipbuilding steel plate CCS grade E material properties

CCS grade E material is a kind of hot rolled general tensile strength steel. The shipbuilding steel plate CCS grade E has yield strength of 34, 100 psi (235 MPa), and ultimate tensile strength of 58, 000 - 75, 500 psi (400-520 MPa). CCS shipbuilding steels come 4 grades in ordinary-strength steel and CCS grade E is the highest one of them.

Shipbuilding steel plate CCS grade E material properties:

CCS grade E C % Si % Mn.Min % P % S % C+Mn/6
0.18 0.10-0.35 0.7 0.035 0.035 0.4
Yield Strength (Mpa) Tensile Strength (MPa) Elongation in8 in.[200mm] (%) Elongation in8 in.[200mm] (%) Impact Energy (J) Test Temperature(°C)
≥235 400-520 ≥21 ≥24 27 -40

For Shipbuilding steel plate CCS grade E, the low impacting test temperatue is under minus 40 centi degree. Therefore, CCS grade E material can be used in the deep oceans and bear the below-zero temperature surroundings.

Over the past ten years, we have built solid business ship with most classification societies. The representatives are BV, LR, GL, RINA, ABS, CCS, NK, DNV, KR, etc. Other than CCS grade E, we also offer BV E , NK E , DNV E , KR E , LR E , RINA E , NV E, etc. shipbuilding steel plates.

Hot ProductsSee More+

  • Shipbuilding steel pipe

    Shipbuilding steel pipe

    GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.

  • Shipbuilding use angle steel

    Shipbuilding use angle steel

    Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.

  • Shipbuilding flat bar

    Shipbuilding flat bar

    Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.

  • Bulb flat steel for shipbuilding

    Bulb flat steel for shipbuilding

    The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.

  • FH40 Shipbuilding steel plate

    FH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.

  • EH40 Shipbuilding steel plate

    EH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.

You can contact us through the following ways:

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

  • Address:XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA
  • Hotline:0086-371-86151827
  • Fax:    0086-371-86011881
  • E-mail:[email protected]