Technical properties of S355G8+N steel plate

1. Technical standard for S355G8+N steel plate: EN 10225-2009.

2. Delivery status of S355G8+N steel plate: normalized rolling, normalizing.

3. Chemical composition of S355G8+N steel plate:

Grade C P S Cr Mo Ni Cu N Nb Ti V Al Si Mn
S355G8+N 0.14 0.02 0.007 0.25 0.08 0.5 0.3 0.01 0.04 0.025 0.06 0.015-0.055 0.15-0.55 1.00-1.65

Wherein: Cr + Mo + Ni + Cu≤0.90; Nb+V≤0.06; Nb+V+Ti≤0.08

4. Mechanical properties, yield tensile strength and impact energy of S355G8+N steel plate:

Grade Tensile strength Mpa Lower yield strength of corresponding thickness (mm), MPa Elongation Impact energy
t≤100mm T>100mm ≤16 16-25 25-40 40-63 63-100 100-150 A% Temperature ℃ Energy J
S355G8+N 470-630 460-620 355 355 345 335 325 320 22 -40 50

5. Ultrasonic testing of S355G8+N steel plate:
S355G8+N steel plate shall be subject to ultrasonic test according to EN10160; Ultrasonic inspection can be carried out before or after the final heat treatment.

Hot ProductsSee More+

  • Shipbuilding steel pipe

    Shipbuilding steel pipe

    GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.

  • Shipbuilding use angle steel

    Shipbuilding use angle steel

    Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.

  • Shipbuilding flat bar

    Shipbuilding flat bar

    Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.

  • Bulb flat steel for shipbuilding

    Bulb flat steel for shipbuilding

    The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.

  • FH40 Shipbuilding steel plate

    FH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.

  • EH40 Shipbuilding steel plate

    EH40 Shipbuilding steel plate

    The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.

You can contact us through the following ways:

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

  • Address:XICHENG SCIENCE & TECHNOLOGY BUILDING HIGH-TECH DEVELOPMENT ZONE, ZHENGZHOU, CHINA
  • Hotline:0086-371-86151827
  • Fax:    0086-371-86011881
  • E-mail:[email protected]