News Center
Shipyards handle large quantities of steel plates, hull blocks, machinery, and prefabricated components throughout the vessel construction process. Q235 steel can be used for various auxiliary structures that support these material handling operations, including lifting frames, support bases, temporary platforms, and equipment foundations.
A typical Q235 steel frame is designed according to the weight and geometry of the component being handled. Structural members may be arranged to distribute loads efficiently and maintain stability during lifting or positioning. The required plate and section sizes should be determined through engineering calculations rather than relying solely on the nominal strength of the material.
For shipyard handling structures, repeated use is an important consideration. A lifting support or handling frame may be used across multiple production cycles, making dimensional stability and structural condition important for continued service. Regular inspection can help identify deformation, damaged connections, or surface deterioration before they affect safe operation.
The practical fabrication characteristics of Q235 steel also allow handling structures to be adapted for different shipyard layouts and equipment requirements. Reinforcing members can be incorporated into the design when additional load capacity or local strengthening is required.
Because many of these structures operate in workshops, storage yards, or outdoor handling areas, surface protection should also be considered. Suitable coatings can help limit corrosion caused by moisture and industrial exposure, while routine maintenance can extend service life.
For shipyards, Q235 steel can therefore serve as a practical material for non-hull auxiliary structures associated with lifting and material handling. The final design should always account for working loads, lifting methods, dynamic effects, connection details, applicable safety requirements, and the intended operating environment.
GB T 5312 Carbon and carbon-manganese steel seamless steel tubes and pipes are mainly for ship use, also known as shipbuilding steel pipes. Under GB T 5312, there are mainly 5 steel grades: grade 320, 360, 410, 460 and 490. Each grade covers three levels: I, II, III.
Angle steel, commonly known as angle iron, is a long strip of steel whose sides are perpendicular to each other. There are equal angle steels and unequal angle steels. The two sides of equal angle steel are equal in width. The unequal angle steel is also known as L shape profile steel.
Flat bar steel can be produced according to the user's needs, with fixed thickness, width and length. It can reduce the cutting process for users, reduce the consumption of labor and materials, and also reduce the processing loss of raw materials.
Bulb flat steel for shipbuilding
The bulb flat steel is a kind of medium section material which is mainly used in the field of shipbuilding and bridge building, and the shipbuilding bulb flat steel is an auxiliary medium section material for shipbuilding.
The steel for shipbuilding and oil platform---FH40, is the high tensile strength steel.The shipbuilding steel FH40 is the Hull structural steel.We can provide FH40 shipbuilding steel plate price.
The steel for shipbuilding and oil platform---EH40, is the high tensile strength steel.The shipbuilding steel EH40 is the Hull structural steel.We can provide EH40 shipbuilding steel plate price.
If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.
BBN SHIP STEEL FACTORY
